Why doesn't the telephone that is plugged into the POTS port of the Pace ISDN TA ring on my ISDN telephone line? The line does not have MSN enabled.

FAQ123
You need to tell the Pace ISDN TA that the line that you have does not use Multiple Subscriber Numbering (MSN).
To enable reception of calls on the standard analogue telephones attached to the Pace ISDN TA, follow this procedure.

Using a terminal package enter the following commands:

AT$Z
AT#SAV120=
AT#NBV120=
AT#NBPOTS1=
AT#NBPOTS2=
AT#IPPOTS1=40
AT#IPPOTS2=41
AT&W
AT#Z
You should now find that the analogue telephone attached to the Pace ISDN TA should now audibly ring when someone attempts to call you.


Click to Go Back to choose a different category