Why doesn't the telephone that is plugged into the POTS port of my Pace ISDN TA ring on my ISDN2e telephone line with MSN?

FAQ120
To enable the ability of the standard analogue telephones attached to the Pace ISDN TA to ring correctly, follow this procedure.

Using a terminal package enter the following commands:

AT$Z
AT#SAV120=
AT#NBV120=xxxx (Where xxxx are the last four digits of the number associated with the ISDN interface)
AT#NBPOTS1= (Where xxxx are the last four digits of the number associated with TEL 1)
AT#NBPOTS2= (Where xxxx are the last four digits of the number associated with TEL 2)
AT#IPPOTS1=40
AT#IPPOTS2=41
AT&W
AT#Z

You should now find that the analogue telephone attached to the Pace ISDN TA should now audibly ring when someone attempts to call you.


Click to Go Back to choose a different category