FAQ116 |
Start the TERMINAL program from within the ACCESSORIES group. Once it has started, click on SETTINGS then click on COMMUNICATIONS. Select the correct com port that the Pace ISDN TA is connected to from the list and then click OK.You should now have a blank screen with a flashing cursor.
Type the characters
AT
If the Pace ISDN TA is configured correctly it will respond with OK. If the Pace ISDN TA does not respond correctly, try resetting the unit by using the following commands, (you may not see the commands but continue to type them).
AT$Z
AT#Z
Retest the Pace ISDN TA by typing
AT |
|---|
